| Customization: | Available |
|---|---|
| Function: | Pressure Regulating, Flow Control |
| Installation: | Plate |
|
Still deciding? Get samples of US$ 34/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
4WE6JB61B/CG27N9Z4.
4WE6JB61B/CG27N9Z5L.
Please contact us for more details.
| Hydraulic | |||
| Max.operating pressure Ports A,B,P (Mpa) | up to 35.0 | ||
| Port T (Mpa) | 21(-);16(~) | ||
| with symbols A and B, port T must be used as a drain port if the operating pressure is above the permitted tank pressure. |
|||
| Max.flow (L/min) | 80(-);60(~) | ||
| Pressure fluid | Mineral Oils or Phosphate Ester | ||
| Viscosity range (mm2/s) | 2.8~500 | ||
| Pressure fluid temperature range (ºC) | -30~+80 | ||
| Degree of contamination | Maximum permissible degree of contamination of hydraulic fluid to NAS 1638 class9. We therefore recommend a filter with a minimum retention rate of β10≥75 |
||
| Electrical | |||
| Voltage type | DC | AC 50/60Hz | |
| Available voltages (V) | 12, 24, 42, 60, 96 | 42, 110, 120, 230 | |
| 110, 180, 205, 220 | 50/60Hz | ||
| Power consumption (W) | 30 | ||
| Holding power (VA) | - | 50 | |
| Switch-on power (VA) | - | 220 | |
| Duty | continuous | continuous | |
| Switching time to IS0 6403 | ON (ms) | 25 to 45 | 10 to 20 |
| OFF (ms) | 10 to 25 | 15 to 40 | |
| Protection to DIN | IP 65 | ||
| Switching frequency (cycles/h) | up to 15000 | up to 7200 | |
| With electrical connections the protective conductor (PE) must be connected according to the relevant regulations |
|||
){kind=link}